Highlight:
Gyts Armored Fiber Cable
, Armored Fiber Cable 96 Core
, GYTA Armored Fiber Cable
Outdoor Duct GYTA Gyts Armored Fiber Cable 12 24 48 72 96 Core
Outdoor Duct Cable GYTA Gyts Armored Fiber Cable 12 24 48 72 96 Core Armoured Fiber Optic Cable
GYTA single-armored cables feature stranded loose tube filled with a water-resistant filling compound.
A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count,
locates in the center of core as a metallic strength member.
Tubes (and fillers) are stranded around the strength member into a compact and circular cable core.
An Aluminum Polyethylene Laminate (APL) is applied around the cable core,
which is filled with the filling compound to protect it from water ingress.
Then, the cable is completed with a PE sheath.
It‘s suitable for installation for long haul communication and LANs,
especially suitable for the situation of high requirements of moisture resistance.
Characteristics:
·Steel jacket offers high tension and crush resistance special gel in the tube offers critical protection for the fibers
·With steel central strength member ·PE jacket itself prevents UV,
and UV material can be added ·to perform much better It's avalable under high and low temperatures ·anti-aging
Applications:
·Conduit/buried ·Connecting communication equipments ·Mulfi-cores wiring systems in data centers
Standard:
·GYTS complies with YD/T901-2009 and IEC 60794-1 standards ·YD/T 901-2009 & IEC 60794-1
GYTS Cable Place Order Information
CABLE DATA
Cable
Type |
Fiber
Count |
Stranded
units |
Cable
Diameter
(mm) |
Cable
Weight
(kg/km) |
Bending Radius
Dynamic/Static
(MM) |
Tensile Strength
Long/Short Term
(N) |
Crush Resistance
Long/Short Term
(N/100 mm) |
| GYTA≤60 |
≤60 |
5 |
9.8 |
108 |
20D/10D |
240/800 |
300/1000 |
| GYTA-62~72 |
62~72 |
6 |
10.4 |
129 |
20D/10D |
300/850 |
300/1000 |
| GYTA-74~96 |
74~96 |
8 |
10.6 |
132 |
20D/10D |
350/1200 |
300/1000 |
| GYTA-98~120 |
98~120 |
10 |
12.1 |
161 |
20D/10D |
450/1400 |
300/1000 |
| GYTA-122~144 |
122~144 |
12 |
13.6 |
198 |
20D/10D |
700/2000 |
300/1000 |
| Fiber Parameters |
| No. |
Items |
Unit |
Specification |
| G.652D |
| 1 |
Mode Field Diameter |
1310nm |
μm |
9.2±0.4 |
| 1550nm |
μm |
10.4±0.8 |
| 2 |
Cladding Diameter |
μm |
125.0±1.0 |
| 3 |
Cladding Non-Circularity |
% |
≤1.0 |
| 4 |
Core-Cladding Concentricity Error |
μm |
≤0.5 |
| 5 |
Coating Diameter |
μm |
245±5 |
| 6 |
Coating Non-Circularity |
% |
≤6.0 |
| 7 |
Cladding-Coating Concentricity Error |
μm |
≤12.0 |
| 8 |
Cable Cutoff Wavelength |
nm |
λcc≤1260 |
|
9
|
Attenuation(max.)
|
1310nm |
dB/km |
≤0.35 |
| 1550nm |
dB/km |
≤0.21 |
| 1380nm |
dB/km |
≤0.35 |
| 1625nm |
dB/km |
≤0.24 |
|
10
|
Attenuation and wavelength
|
1310nm 1285-1330nm |
dB/km |
≤0.04 |
| 1550nm 1525-1575nm |
dB/km |
≤0.03 |
| 1550nm 1480-1580nm |
dB/km |
≤0.05 |
|
11
|
Dispersion
|
1288-1339nm |
ps/(nm.km) |
≥-3.5, ≤3.5 |
| 1271-1360nm |
ps/(nm.km) |
≥-5.3, ≤5.3 |
| 1480-1580nm |
ps/(nm.km) |
≤20 |
| 1550nm |
ps/(nm.km) |
≤18 |
| 12 |
Zero dispersion wavelength |
Nm |
1300-1324 |
| 13 |
Zero dispersion slope |
ps/(nm2•km) |
≤0.092 |
| 14 |
Typical value |
ps/(nm2•km) |
0.04 |
| 15 |
Largest individual fiber |
Ps/√ km |
0.2 |
| 16 |
Link design values |
Ps/√ km |
0.1 |
| 17 |
Two way average |
1310nm-1550 |
≤0.01dB |
Cable Marking&Fibers Colors
COMPANY Fiber cable name N*cores G.652D 2024 XXXXm
*The marking is printed every 1 meter;
**”G.652D” means ITU-T Rec. Low Water Peak (LWP) G.652 single mode optical fiber..
Also can according to client cable marking.
Your message must be between 20-3,000 characters!
