Aerial Figure 8 Fiber Optic Cable Hot 12 Core Fiber Optic Cable Seven Stranded Messenger Wires Optical Fiber Cable Figure 8

Aerial Figure 8 Fiber Optic Cable Hot 12 Core Fiber Optic Cable Figure 8 Seven Stranded Messenger Wires Optical Fiber Cable Figure 8

The fibers, 250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.

Technical data:

Numbers of fibers: 6-8,10-12,14-24,30-72

Design(Strength Member+Tube&Filler): Central Steel wires+Stranded Loose Multi-tube Cable

Fiber type: Single mode G.652.D

Strength Member: PSP

Loose Tube: PBT

Filler Rope: No

Water Blocking Layer(Material): Water Blocking tape

Additional Strength Member(Material):PSP

Outer Sheath: PE

Cable Diameter(±0.2mm): 6.8*9.2*18mm;7*9.5*18.5mm

Cable Weight(±10.0kg/km): 210-250kg

Attenuation coefficient : @ 1310nm≤0.35dB ; @ 1550nm ≤0.2dB

Min. bending radius Without Tension: 10.0×Cable-φ

Min. bending radius Under Maximum Tension: 20.0×Cable-φ

 GYTC8S Cable Place Order Information

CABLE DATA

Cable Marking&Fibers Colors

COMPANY Fiber cable name N*cores G.652D 2024 XXXXm

*The marking is printed every 1 meter;
**”G.652D” means ITU-T Rec. Low Water Peak (LWP) G.652 single mode optical fiber..

Also can according to client cable marking.